banner



How Do You Repair Door Safety Lock System On Kenmore Microwave Model 401.80082700

One mean solar day I heard a pop, and afterwards that the microwave door would no longer latch closed! Y'all could push the door closed, but information technology would just bounce open up again. The door would not stay airtight, so the low-cal was on constantly.

I took it apart and determined that a minor plastic hook in the latch mechanism had cleaved. This quick mail service details the simple fix.

If you buy through links on our site, nosotros may earn an chapter commission – at no toll to you.

Here is the door sitting open because it would not latch…

01-microwave-door-wont-latch-closed

Kenmore/Samsung Microwave Broken Door Latch

Okay, and so the microwave in question is a Kenmore Model No. 401.85042010. Subsequently a few cyberspace searches, this appears to be a very common problem, besides plaguing several different brand names (Including Kenmore, Samsung, and Maytag) with slight variations.

02-microwave-kenmore-401-85042010-door-latch

Other model numbers for which the set for this latch mechanism applies (a more consummate listing is at the end of this post):

Kenmore: 40180082010, 40180082700, 40180083700, 40180084700, 40180086700, 40180089700, 40180092010, 40180092700, 40180093010, 40180093700, 40180094700, 40180099010, 40180099700, 40185042010, 40185042210, 40185042310, 40185043010, 40185043210, 40185043310, 40185044010, 40185044110, 40185044210, 40185046010 etc;

Samsung: 592856000, 592856030, 592856040, 592856060, 592856090, 592856100, 592856130, 592856140, 592856190, 80082, 80083, 80084, 80086, 80089, 80092, 80093, 80094, 80099, BMHC815SS, BMHC815SSXAC, BMHC815WW, ME16H702SEB, ME16H702SES, ME16H702SEW

Tools and Supplies:

  • flat-blade screwdriver or pigment scraper
  • 1/xvi″ drill
  • Replacement Latch Mechanism (Part# DE64-00760A)
  • Replacement Door Leap (Part# DE61-00048A)

Process to Fix a Broken Microwave Door Latch

To get at the latch machinery, utilize a thin flat tool such as a flat-bladed screwdriver or a paint scraper and pry out the trim on the inner role of the microwave door.

03-remove-trim-microwave-latch

There are these plastic clips that hold the trim in place. I only pried until they popped loose, and none of them snapped, only if you are worried near them snapping, you could reach in with a small-scale tool and press the tab out of its hole, afterward you have pried out the first 1 or ii clips. There appears to be about 2 clips on each edge.

11-reassemble-trim-microwave

It is only necessary to remove the trim on the side with the hook latches. Once the trim is out of the way, you tin can see the latch mechanism. lift it straight up to unseat it from its holes, then pull it out.

04-remove-latch-mechanism-pull-up-kenmore-microwave

In my case, the little plastic hook that holds one end of the spring, had snapped off. That must have been the 'popular' sound I heard when information technology failed!

05-broken-latch-kenmore-microwave

I chose to endeavour repairing my existing latch. Another option is to merely buy a new one off of Amazon since they are pretty cheap. Here is the link if yous want to bank check the current toll:

DE64-00760A Microwave Door Latch Replacement

For the repair I did, I used a drill with a pocket-size drill bit.

06-drill-hole-latch-kenmore-microwave

I used a 1/16″ drill chip and it worked fine.

07-1-16th-inch-drill-bit

At the identify where the hook broke off, I drilled a hole through the piece of plastic that remained, as shown.

08-drill-new-hole-latch-kenmore-microwave-broken

Then, take the spring, and hook information technology through the hole y'all just drilled. If your spring broke, here is the link for a new one (it is labeled every bit Samsung, but applies to Kenmore as well):

Samsung DE61-00048A Primal Spring

09-kenmore-microwave-spring

And then hook the other cease of the spring through the corresponding hole in the microwave door.

10-kenmore-microwave-spring-locaation

Then pull up on the latch mechanism, and feed it into the holes at the top and the lesser of the channel in the microwave door that it rides in.

04-remove-latch-mechanism-pull-up-kenmore-microwave

That'due south pretty much information technology! Press the trim piece back into place, and you're all set.

Thanks for reading PracticalMechanic.com!

Tools and Supplies:

  • apartment-blade screwdriver or paint scraper
  • one/16″ drill
  • Replacement Latch Mechanism (Part# DE64-00760A)
  • Replacement Door Leap (Part# DE61-00048A)

Other Model Numbers:

Kenmore: Samsung: Samsung: Samsung:
40180082010 592856000 SMV9165BC/XAA SMH7175BC/XAA
40180082700 592856030 SMV9165SC/XAA SMH7175BE/XAA
40180083700 592856040 SMH7174BC/XAA SMH7175CC/XAA
40180084700 592856060 SMH7174BE/XAA SMH7178STD/XAA
40180086700 592856090 SMH7174CC/XAA SMH7175WC/XAA
40180089700 592856100 SMH7174WC/XAA SMH7175WE/XAA
40180092010 592856130 SMH7174WE/XAA SMH7178STE/XAA
40180092700 592856140 SMH7177STE/XAA SMH4150BD/XAA
40180093010 592856190 SMH4150WD/XAA SMH1713S/XAA-01
40180093700 80082 SMH7175BC/XAA ME18H704SFS/AA-00
40180094700 80083 SMH7175BE/XAA ME20H705MSB/AA-00
40180099010 80084 SMH7175CC/XAA ME20H705MSS/AA-00
40180099700 80086 SMV9165BC/XAA BMHC815SS
40185042010 80089 SMV9165SC/XAA BMHC815SSXAC
40185042210 80092 SMH7174BC/XAA BMHC815WW
40185042310 80093 SMH7174BE/XAA ME16H702SEB
40185043010 80094 SMH7174CC/XAA ME16H702SES
40185043210 80099 SMH7174WC/XAA ME16H702SEW
40185043310 SMH7174WE/XAA
40185044010 SMH7177STE/XAA
40185044110 SMH4150WD/XAA
40185044210
40185046010

How Do You Repair Door Safety Lock System On Kenmore Microwave Model 401.80082700,

Source: https://practicalmechanic.com/2020/07/25/broken-latch-quick-and-easy-fix-microwave-kenmore-and-samsung/

Posted by: hibblerackind.blogspot.com

0 Response to "How Do You Repair Door Safety Lock System On Kenmore Microwave Model 401.80082700"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel