Rwater Damage And Hole Cut In Popcorn Ceiling - How To Repair?

Past Matt Weber

H2o leaks are house killers, and this drywall repair story is testament to that. Act fast at the beginning sign of a water trouble, considering chances are good the leak has existed for a while before you've discovered it. This ways that damage which has already occurred might be hidden in the walls or ceiling, and will but worsen until the problem is resolved.

The ugly, melted, mold-stained ceiling shown in this article is the consequence of a leaking bathtub overflow gasket from the room above. Most of the mildew had been concealed by the ceiling texture (which had been coated in latex pigment and served equally a kind of leak-hiding "peel" for a while).

A little work with a scraper revealed that not just had the ceiling been repaired in the past, but the new leak had been spreading in hush-hush throughout the drywall. And it wasn't pretty.

We used a scraper to skin away the loose texture and so cut out the unusable drywall in a foursquare shape. An oscillating tool with a drywall blade is a handy tool for the making the cutting-out.

Damaged Ceiling

Y'all'll need a drywall patch for the ceiling, so measure out the thickness of the drywall. It's common for ceilings to use 5/eight-inch drywall while the walls are 1/2 inch, because the thicker sheets tend to resist sagging. Cutting a replacement patch from drywall that's the same thickness.

It's a good idea to cutting ii×4 blocking to fit between the joists and straddle the joints between your patch and surrounding ceiling drywall. Toe-screw the blocking in identify with 3-in. fasteners. The blocking will support the patch edges with solid backing to minimize move and prevent neat in the finished ceiling.

Drywall tends to fissure and crumble when screwed within an inch of its edges. To forbid dissentious the patch, we fastened an intermittent ii×four block between the joists so we could drive screws through the heart of our patch instead of the edges. Brand certain to install the blocking flush with the lesser edge of the ceiling joists.

Insert the drywall patch into the hole and fasten to the center cake with drywall screws.

We filled the joints and screw heads with a flexible spackling compound and skim-coated the unabridged patch to blend with the surrounding ceiling.

Nosotros used Gardner Flex-N-Fill spackling compound, which not only stays flexible to prevent cracks, only it has a congenital-in primer, which saves an extra step.

Subsequently the spackling compound has completely dried, the next stride is to utilise the ceiling patch. Spray-on and brush-on "popcorn ceiling patch" products are bachelor, only we prefer the castor-on diverseness.

The brush-on patch allows the states to move around the aggregates and adjust the texture to more than closely lucifer the surrounding ceiling. Once the texture had dried, I cut a small piece of crown molding and finish-nailed it as a transition slice between the ceiling and shower environment.

The Popcorn Ceiling Patch is a latex-based production that should be coated with shellac-based primer to forbid staining. If your textured ceiling has been painted similar the one in this commodity, then terminate the repair with a matching topcoat.

Rwater Damage And Hole Cut In Popcorn Ceiling - How To Repair?,

Source: https://extremehowto.com/patch-a-popcorn-ceiling/

Posted by: hibblerackind.blogspot.com

Share this post